Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Rims

WTB Asym TCS Rim 29-inch
$80.95
Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High end WT69 Alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS (tubeless compatible system) inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.
GSport Ribcage Rim
$174.99
The Ribcage has been one of the only rims to have true design breakthroughs in the last few years, since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesnt say G-Sport on the rim, don't expect it to perform like a G-Sport rim. The Ribcage is a light weight rim that can take anything you throw at it. With the ribcage the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for us in an on-site foundry . At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. GSport offers rims in HARD anodized finishes rather than the decorative anodizing used by most companies. All of these advantages create the premier rim, but do effect the cost. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 500g /17.6oz - Weight (Chrome Plate): 540g / 19oz - Width: 36mm ERD: 389
Spank Oozy Trail 395+ Rim
$95.00 - $99.00
Finally, an ultra-wide alloy rim with trail weight and true all mountain strength! Spank Industries' OOZY Trail 395+ rims were designed to optimize the performance of both plus-size and modern high-volume tires. The OOZY Trail 395+ rim's 35mm internal width is the perfect solution for riders seeking an ultra-wide aggressive trail rim model that doesn't tip the scales. Combining SPANK's proprietary Dynamal alloy, patented Oohbah profile, and Bead Bite tubeless rim hooks, The OOZY Trail395+ offers the perfect blend of strength and stiffness with unparalleled tubeless performance. You don't have to go fat to go ultra-wide with the OOZY Trail 395+ rim. - Key technologies: Bead Bite, OohBah, Dynamal Alloy - Material: MGR Dynamal Alloy - Size (in.): 27.5" / 29" - Weight (g): ±560 (27.5") / ±590 (29") - Hole Count: 32H - Inner / Outer Width (mm): 35 / 39.5 - Valve: F/V Presta - Tubeless: tubeless ready - Finish: shotpeen anodized, laser logos - ERD (mm++): 554 (27.5") / 591 (29") - ETRTO (mm): 584x35 (27.5") / 622x35 (29") - All Technologies: Bead Bite, OohBah, Bead Nip, Dynamal Alloy, MGR - Discipline: trail
Spank Spike Race 33 Rim
$90.00
Now you can add traction and stability to your ride without sacrificing speed. SPANK Industries is a longtime leader in the development of wide rim technology. The SPIKE Race 33 Rim is the evolution of SPANK’s infamous SPIKE Race rim line up. With a 28mm inner profile, the SPIKE Race 33 combines the wide stance of its predecessor the SPIKE 35 EVO, with the light weight of SPANK’s legendary Race 28. The Race 33 was designed to optimize tire spread across a wider array of tires options, without squaring off tire profiles, making it ideal for anyone in need of enhanced traction and stability without compromising speed on track. Sturdy Dynamal alloy construction paired with SPANK’s acclaimed OohBah rim design, make the SPIKE Race 33 one of the strongest alloy hoops on the market. Equipped with SPANK’s patented Bead Bite anti-burp tubeless system, the SPIKE Race 33 offers unmatched tire security and performance with or without tubes. - Key Tech: Bead Bite, OohBah, Dynamal Alloy - ERD (mm++): 529 (26") / 554 (27.5") - ETRTO (mm): 559x28 (26") / 584x28 (27.5") - Discipline: Race / Freeride
Stan's NoTubes Arch MK3 27.5-inch Rims
$100.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25-inch to 2.5-inch tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5-inch Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for Trail tires
Odyssey Aerospace Rim
$67.99
The Aerospace features an “aero” or “V-shaped” cross-section, which creates a unique structural design. Made from 6000 series aluminum, it’s both easy to manufacture, incredibly durable and allows us to create a rim that’s strong, light and affordable. Thick inner sidewalls, and a lowered center wall section provide more room when installing or removing tires, and running brakes isn’t an issue. The Aerospace uses a traditional lacing pattern, just like the HAZARD LITE, SEVEN K-A and QUADRANT. FEATURES - Precision welded joint 6000 series aluminum SPECS - Width: 34mm - Height: 23mm - ERD: 380mm - 36-hole - 450 grams (15.8oz)
Odyssey 7KA Rim
$89.99 - $99.99
The original 7000 series aluminum BMX rim. This specialty grade of aluminum lets Odyssey produce a rim that is both lightweight and strong. The Seven-KA is a proven, go-to rim for pro-level riders worldwide. SPECS - 7000 series aluminum - Width: 34mm - Height: 17mm ERD: 390mm
Odyssey Quadrant Rim
$39.99
The QUADRANT uses a unique pinned junction design that allows Odyssey's lightest rim to also be their most affordable. With its offset spoke drilling, this rim is stronger than its weight suggests. The Quadrant is one of the few pinned rims that receives regular and unquestioned use by pro level riders. SPECS - 6000 series aluminum - Width: 34mm - Height: 18mm - ERD: 392mm - 36-H - 20 inches - 420 grams (14.8 oz)
Odyssey Hazard Lite Rim
$67.99 - $77.99
A long running standard, the Hazard Lite is revered because of its strength, lightweight and affordable price. Constantly imitated but never matched in quality or reliability, the Hazard Lite is used regularly by pro-level riders–even the ones that are being paid to ride something else. SPECS - 6000 series aluminum - 32mm wide - 17mm tall 36H - 20-inch version (ERD: 390mm) - 24? version (ERD: 486mm)
GSport Birdcage Rim
$79.99
Someone said a few years ago that there was nothing new left to do with BMX rims, yet since then GSport has gone on to do quite a lot of new stuff, and here’s an example of the latest. At first glance the Birdcage looks like a fairly conventional “aero” style rim, but there is more to it than that. The first clue comes from the name; birds have hollow bones to save weight whilst retaining as much strength as possible, and the Birdcage rim has a hollow bead for the same reason. The rim’s hollow bead is still big and chunky to help reduce the chances of pinch puncturing or flat spotting the rim, but by creating a tiny hollow cavity inside it GSport can also keep the weight right down. The next innovation was to adapt their cross-lacing design to the narrow inner wall of the rim. They managed to squeeze a few extra millimeters of spoke offset out of the design to help increase lateral wheel strength, and by carefully tailoring the rim’s cross-section we managed to match all the angles to the nipple so that the walls of the rim section act like the ribs inside the Ribcage rim, which helps to support the spoke nipples as much as possible. Traditionally, the greatest flaw in “aero” rims has been the valve hole. “Aero” rims position a lot of very efficiently utilized mass in the base of the rim to support the spokes and give the rim good strength, then a huge hole is drilled through it for the valve stem and a massive weak-spot is created. With the Birdcage GSport has offset the valve hole so that this section can retain its strength. A handy side-effect of this is that fitting a pump is now more convenient. Aside from these original features, GSport spent a lot of time “sweating the small stuff”. They’ve ensured that the deep center allows for easy tire removal and fitting, and they've made sure that the sidewalls, while slimmed down, are still suitable for brake use. The end result is one of their most high tech rims to date. With a weight of just 408g (14.4oz) it outperforms most rims weighing 20-30% more, and the weight saving from the rotational mass of the wheel feels fantastic. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 hole - Weight: 408g / 14.4oz - Width: 34mm ERD: 383mm
GSport Rollcage Rim
$79.99
If the Ribcage is too rich for your blood, the Rollcage is its more affordable sibling. Using the same proven shape and cross-over-lacing to create a really strong wheel, but industry standard 6061-T6 alloy and no ribs drops the price considerably. While the Rollcage is the lesser expensive, it is still an excellent rim, with the same super tough sidewall and bead profile its the lightest rim we make at 450 grams. You will recognize the rims by their outer shape, but the Rollcage is actually 2mm narrower and easily identified by the groove in the middle of the inner wall. We offer rims in HARD anodized finishes rather than the decorative anodizing used by most companies. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 450g / 15.9oz - Weight (Chrome Plate): 490g / 17.3oz - Width: 34mm ERD: 389mm
Spank Oozy Trail 345 Rim
$90.00
When traction is king, go wide! SPANK Industries has been an innovator in wide rim design for over a decade, and the OOZY Trail 345 Rim is the culmination of these efforts. Boasting a 30mm inner width, the OOZY Trail 345’s design optimizes performance with the widest range of tire shapes and sizes on the market. This wider internal width improves tire spread, effectively increasing traction, without squaring tire profiles excessively, which can lead to reduced maneuverability and cornering traction. The OOZY Trail 345 Rim combines the strength of Dynamal alloy, the stiffness of Spank’s patented Oohbah reverse-well profile, and the enhanced tubeless performance of Bead Bite anti-burp rims hooks into a lightweight, trail-tuned package. - Key technologies: Bead Bite, OohBah, Dynamal Alloy - Material: MGR Dynamal Alloy - Size (in.): 27.5" / 29" - Weight (g): ±520 (27.5") / ±540 (29") - Hole Count: 32H - Inner / Outer Width (mm): 30 / 34.5 - Valve: F/V Presta - Tubeless: tubeless ready - Finish: shotpeen anodized, laser logos - ERD (mm++): 554 (27.5") / 591 (29") - ETRTO (mm): 584x30 (27.5") / 622x30 (29") - All Technologies: Bead Bite, OohBah, Bead Nip, Dynamal Alloy, MGR - Discipline: trail
Spank Oozy Trail 295 Rim
$90.00
The OOZY Trail 295 Rim was the first Spank Industries OohBah profile rim model, with a revolutionary tubeless enhancing design, called BeadBite. The OOZY Trail 295's wide 29.5mm outer, 24.5mm inner width allows the use of a wide range of tire sizes and profiles, and intensifies wheel stiffness while increasing the tire volume, improving both comfort and traction in loose conditions. Despite its wide burly appearance, the SPANK OOZY Trail 295 is no heavy weight. At as low as 450g in, it goes head to head with many carbon rim competitors with a safer, more durable, responsible, and economic Dynamal alloy construction. SPANK's patented Oohbah rim profile with inverted tube well, creates an element of hoop strength in the lateral profile, while reinforcing the critical side wall flanges, and means wider, lighter rims which deliver the highest strength to weight ratio on the market. Smooth ramps leading to the bead seats mean tubeless inflation is a breeze with most hand or floor pumps. - Key technologies: Bead Bite, OohBah, Dynamal Alloy - Material: MGR Dynamal Alloy - Size (in.): 26" / 27.5" / 29" - Weight (g): ±450 (26") / ±470 (27.5") /± 490 (29") - Hole Count: 32H - Inner / Outer Width (mm): 24.5 / 29.5 - Valve: F/V Presta - Tubeless: tubeless ready - Finish: polish anodized, decal logos - ERD (mm++): 528 (26") / 555 (27.5") / 591 (29") - ETRTO (mm): 559x24.5 (26") / 584x24.5 (27.5") / 622x24.5 (29")
Spank Spoon 28 Rim (20
$59.00
Performance hoops purpose-built for kids! SPANK Industries’ SPOON 28 rims are the perfect solution to upgrade your kid’s MTB. Manufactured from light yet durable 6-series alloy, the SPOON 28 rim is a safe, strong, performance-enhancing hoop, with a moderate width that accepts most 20-inch tires. Unlike the majority of 20-inch rims on the market, SPOON 28 rims were designed specifically for junior shredders on 20-inch mountain bikes. Key Technologies: Bead Nip Tubeless: Not recommended ERD (mm++): 382 ETRTO (mm): 406x23 Discipline: Kids
Stan's NoTubes Arch MK3 29-inch Rims
$100.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25-inch to 2.5-inch tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5-inch Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for Trail tires
Whisky Parts Co. No.9 Fat Carbon 27.5 Rim (80mm)
$499.00
Whisky's 80w rims offer 27.5inch fatbike users a light weight, easily tubeless platform. They help maximize the inherent rollover and longer contact patch 27.5-inch fat tires offer, while combating the weight penalty a larger diameter alloy rim can exhibit. True to form as their other rims, Whisky's TBLS beads offer secure tire performance at low pressures.
Whisky Parts Co. No.9 Fat Carbon 26-inch Rim (100mm)
$500.00
Whisky's No.9 100w rim has a 94.5mm inner width to maximize the footprint of fat tires up to 5.05-inches wide. Its double-wall construction makes it a unique, one-of-a-kind carbon fat rim. It supports the structure of the tire’s sidewall for a stable, traction-laden ride while simultaneously improving your float on snow and sand. If you’re looking for the best in winter traction, the No.9 100w has you covered.
Origin8 Bolt Alloy Fat Rim
$110.50
- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Tubeless ready - Disc brake only - Pinned joint - ISO-Mountain certified - ISO: 559 - Width ID: 84 - Width OD: 90 - Profile: 14 - Wall: Sgl - Side: Disc - Valve: PV - Weight: 750g - ERD: 549 - Tire Compatibility: Tubeless Compatible
Stan's NoTubes ZTR Alpha Rim 340 (700c)
$120.00
Stan's ZTR Alpha 340 Rim lets you enjoy the advantages of a tubeless setup on your road and cyclocross bikes. At only 350 grams, it's light, strong, and it features a semi-aero profile for quick accelerations and blazing speed. The Alpha rim also uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.
Origin8 DNZ18 Rim (700c)
$32.30
Origin-8's DNZ18 is a lightweight 700 x 22c aero aluminum clincher rim. It has machined sidewalls for great braking and the spoke holes are reinforced with eyelets for durability.
WTB LaserDisc i21 (27.5-inch)
$62.99
A true all-purpose rim, WTB's LaserDisc i21 is perfect for just about every trail on the mountain. Its 21mm inner width accommodates a wide range of tires from narrow XC treads to meaty downhill knobbies, while WTB's fine aluminum choice, I-beam construction and eyelet-reinforced spoke holes maximize strength and stiffness for outstanding reliability and cornering precision.
Spank Spoon 32 Rim
$70.00
Spank's Spoon 32 rims are gravity rims done right! If your rides encompass big hits and fast descents then a pair of Spoon 32 rims might be just what you need to tackle your favored terrain. - Six Series aluminum alloy - Disc specific rim - Tubeless Ready
Stan's NoTubes ZTR Grail Rim (700c)
$105.00
Stan's Grail rim comes close to being the ultimate option for disc brake road and 'cross wheels. At just over 24mm-wide, and almost 25mm deep, it's aero, stiff, and ready to take the lead on the race course or on the road. Stan's own Bead Socket Technology offers unmatched tubeless setup for a wheel that's sure to please.
Stan's NoTubes ZTR Iron Cross Rim (700c)
$88.00
Stan's Iron Cross Rims are their answer to the mud and madness that is cyclocross. Stan's renowned tubeless system and Bead Seat Technology provides lower tire pressures, increases tire volume, and delivers superior cornering traction. These super low-profile, disc-only rims feature a semi-aero profile and low weight to help you sprint out of the corners and gap the pack.
Stan's NoTubes ZTR Arch EX Rim (26-inch)
$88.00
Stan's ZTR Arch EX rim combines the lightweight design of their race-specific rims with more internal reinforcements to create a super-strong, singletrack-ready rim. The Arch EX also uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.
Stan's NoTubes ZTR Crest Rim (26-inch)
$85.00
Thicker walls plus extremely low weight make Stan's ZTR Crest rim a stiff, light XC race rim. The Crest uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.
Stan's NoTubes ZTR Alpha 400 Rim (700c)
$120.00
Stan's ZTR Alpha 400 Rim lets you enjoy the advantages of a tubeless setup on your road and cyclocross bikes. At only 350 grams, it's light, strong, and it features a semi-aero profile for quick accelerations and blazing speed. The Alpha rim also uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction. And this version can be used with rim brakes as well as disc brakes.
Origin8 AT-Pro-60 Fatbike Rim
$59.50
• Size: 26 x 4.0 • Single wall construction • Non-machined sidewall • Color: Black • Drilling: 32 • ERD: 536 • Width: 60mm • Depth: 24.5
Origin8 AT-PRO-80 Fatbike Rim
$68.00
• Size: 26x4.0 • Single wall construction • Non-machined sidewall • Color: Black • Drilling: 32 • ERD: 536 • Width: 80mm • Depth: 24.5 • Weight: 1,061 grams
Origin8 DAT-PRO-101 Fatbike Rim
$51.00
• Size: 26 x 4.0 • ISO: 559 • Double Wall Construction • Non-machined Side Wall • Color: Black • Drill: 36 • Weight: 1,579 grams • Width: 100mm • Rim depth: 29.5mm
Page 1 of 5 Next page