How to Dress for Fall Riding

How to dress for fall riding

Whether you prefer the woods or the road, pedaling into fall gives you access to sights, smells, and sensations that fair-weather biking can't offer. Knowing how to dress for Fall riding will increase your comfort and enjoyment.  Here are a few key changes to your cycling wardrobe and gear that will keep you cranking while you wait for the first snowfall of winter.

#1: Cycling Jackets

Okay, the temperature is 40°F to 60°F and your first thought as you head out is to bundle up.  Beware!  After 10 minutes of hard riding, your body will start generating some serious heat. A lightweight, wind-resistant shell makes a great outer layer to cut the chill until you are up to speed.  Make sure the jacket has a full-zip front for venting, a drop tail for coverage in the back and can be compacted to stow in a jersey pocket.

#2: Biking Jerseys and Tops

Wearing multiple light layers of clothing helps trap insulating air between.  Start with a thin polyester base layer that will quickly wick moisture away from your skin to keep you dry. On colder days, add an easy-to-shed middle layer such as a synthetic long-sleeve shirt or bike jersey. A vest is another good option, as it warms your core while leaving your arms free to move.

#3: Cycling Pants & Tights

The rule of thumb is to keep the knees covered at 60°F or lower, so time to trade in your cycling shorts for knickers, capris or add knee warmers.  If it's colder than knicker weather, use full-length tights.  Breathable tights that have wind-resistant fronts are best but a bit hard to find.  If the tights you select don't have padded bottoms (they often don't), wear them over your bike shorts.

#4: Biking Headwear

The vents in your helmet that are such an asset during the scorching summer months can become a problem when it gets cooler.  To prevent your forehead and ears from going numb, wear a thin synthetic headband under the helmet.  If it's especially cold, choose a skullcap with earflaps, or better yet, a skull cap that can cover your ears too.  Still cold?  Add a helmet cover to block off all the venting and keep the rain out.

#5: Biking Socks

Cycling socks with merino wool will add needed warmth.  Just be sure to pay close attention to how these thicker socks affect the fit of your shoes. Bike shoes tend to be snug anyway, and too many socks might cramp the fit.  Too tight a fit inhibits blood flow, which will cause your feet to get colder and numb.

#6: Bike Shoe Covers

Cycling shoe covers (or booties) cover the your shoes and protect from cold and wind.  Booties can be made from neoprene, Windtex or a variety of materials that block wind and water to keep your feet warm and dry.  Bring your riding shoes and be sure to buy something that fits well.  Other options include toe covers, and chemical heat pads.

#7: Arm & Leg Warmers

Mentioned earlier, arm and leg-warmers are perfect for not-too-cold or variable conditions.  Put them on for the start of a ride and peel them off as weather warms later in the day.  Arm and leg warmers provide lightweight insulation and can be removed and stowed in a jersey pocket without even stopping.

#8: Bike Gloves

It's tough to shift and brake when your fingers are numb.  Leave the fingerless gloves at home and go for full-fingered gloves.  How heavy, warm or waterproof are really a matter of personal choice.  Even if not perfect, a lightweight, wind-resistant pair of gloves will come in handy on many fall and spring rides.

#9: Bike Lighting

With the colorful trees of fall comes reduced daylight.  Place a white light on the front of your bike and a red one (usually a flasher) in the rear for increased visibility.  If you need to light up your path, there are many bright (!!!) and efficient LED headlights available.  If you have never owned a good bike light, you owe it to yourself to check them out.

#10: Bike Reflection

A reflector vest, spoke lights or reflective products make you more visible to cars, especially those approaching you from the side.  Reflectors come in the form of tape, stickers, and plastic pieces that mount to your bike.  Reflectors that mount on the ­wheels get the added visibility of the round-and-round motion, which makes them stand out from a light or reflector placed on a stationary part of your bicycle.

#11: Fenders

A front fender is very important. Without one, water from your front wheel is driven into your bicycle’s drive train causing premature wear throughout the whole system. It also drenches you and everything you’re wearing. Even worse, when water from the road is flung off your front wheel it can land on your face and in your mouth. Fenders tend to come in pairs, and given the known toxicity of gutter runoff, it’s a good idea to just use both of them.